mysql压力测试-sysbench安装及使用说明
一、 安装相关的依赖包
yum install *libMySQLclient*
yum install libtool
二、 安装及简介
1)下载安装包
# wget http://sourceforge.net/projects/sysbench/sysbench-0.4.12.tar.gz
2) 编译安装
# tar –zxvf sysbench-0.4.12.tar.gz
进入解压缩包sysbench-0.4.12,并执行脚本autogen.sh
# cd sysbench-0.4.12
# ./autogen.sh
关键的三步：configure && make && make install
首先是./configure命令，sysbench默认是支持MySQL的benchmarking的，如果不加任何选项则要求保证MySQL的安装路径都是默认的标准路径，headfile位于/usr/include目录下，libraries位于/usr/lib/目录下。因为我的MySQL是源码编译安装的，安装路径是放在/usr/local/mysql下，所以这里要添加相应的选项命令：
# ./configure --prefix=/usr/local/sysbench --with-mysql=/usr/local/mysql
--with-mysql-includes=/usr/local/mysql/include/mysql/
--with-mysql-libs=/usr/local/mysql/lib/mysql/
注意：这里在编译时要将路径写到最后的include/mysql及lib/mysql，如下所示：
–with-mysql-includes=/usr/local/mysql/include/mysql/
--with-mysql-libs=/usr/local/mysql/lib/mysql/
因为网上好多资料都没有提到这一层，在编译时总是编译不过去，这里浪费了好多精力。
接下来执行如下命令：
# make && make install
3）yum安装
如果觉得源码安装麻烦，也可以采用yum安装，操作如下：
# yum install -y sysbench
4)简介
sysbench 可以进行以下测试：
CPU 运算性能测试
磁盘 IO 性能测试
调度程序性能测试
内存分配及传输速度测试
POSIX 线程性能测试
数据库性能测试（OLTP 基准测试，需要通过 /usr/share/sysbench/ 目录中的 Lua 脚本执行，例如 oltp_read_only.lua 脚本执行只读测试）
另外，sysbench 还可以通过运行命令时指定自己的 Lua 脚本来自定义测试。
三、 使用
3.1 查看帮助信息
sysbench --help
可以通过 sysbench --help 查看 sysbench 的可用命令、选项及內建测试类型的帮助信息，不同测试类型可用的命令也不同：
[root@VM_157_18_centos ~]# sysbench --help
Usage:
sysbench [options]... [testname] [command]
Commands implemented by most tests: prepare run cleanup help # 可用的命令，四个
General options: # 通用选项
--threads=N 要使用的线程数，默认 1 个 [1]
--events=N 最大允许的事件个数 [0]
--time=N 最大的总执行时间，以秒为单位 [10]
--forced-shutdown=STRING 在 --time 时间限制到达后，强制关闭之前等待的秒数，默认“off”禁用（number of seconds to wait after the --time limit before forcing shutdown, or 'off' to disable） [off]
--thread-stack-size=SIZE 每个线程的堆栈大小 [64K]
--rate=N 平均传输速率。0 则无限制 [0]
--report-interval=N 以秒为单位定期报告具有指定间隔的中间统计信息 0 禁用中间报告 [0]
--report-checkpoints=[LIST,...] 转储完整的统计信息并在指定的时间点重置所有计数器。参数是一个逗号分隔的值列表，表示从测试开始经过这个时间量时必须执行报告检查点（以秒为单位）。报告检查点默认关闭。 []
--debug[=on|off] 打印更多 debug 信息 [off]
--validate[=on|off] 尽可能执行验证检查 [off]
--help[=on|off] 显示帮助信息并退出 [off]
--version[=on|off] 显示版本信息并退出 [off]
--config-file=FILENAME 包含命令行选项的文件
--tx-rate=N 废弃，改用 --rate [0]
--max-requests=N 废弃，改用 --events [0]
--max-time=N 废弃，改用 --time [0]
--num-threads=N 废弃，改用 --threads [1]
Pseudo-Random Numbers Generator options: # 伪随机数发生器选项
--rand-type=STRING random numbers distribution {uniform,gaussian,special,pareto} [special]
--rand-spec-iter=N number of iterations used for numbers generation [12]
--rand-spec-pct=N percentage of values to be treated as 'special' (for special distribution) [1]
--rand-spec-res=N percentage of 'special' values to use (for special distribution) [75]
--rand-seed=N seed for random number generator. When 0, the current time is used as a RNG seed. [0]
--rand-pareto-h=N parameter h for pareto distribution [0.2]
Log options: # 日志选项
--verbosity=N verbosity level {5 - debug, 0 - only critical messages} [3]
--percentile=N percentile to calculate in latency statistics (1-100). Use the special value of 0 to disable percentile calculations [95]
--histogram[=on|off] print latency histogram in report [off]
General database options: # 通用的数据库选项
--db-driver=STRING 指定要使用的数据库驱动程序 ('help' to get list of available drivers)
--db-ps-mode=STRING prepared statements usage mode {auto, disable} [auto]
--db-debug[=on|off] print database-specific debug information [off]
Compiled-in database drivers: # 內建的数据库驱动程序，默认支持 MySQL 和
PostgreSQL
mysql - MySQL driver
pgsql - PostgreSQL driver
mysql options: # MySQL 数据库专用选项
--mysql-host=[LIST,...] MySQL server host [localhost]
--mysql-port=[LIST,...] MySQL server port [3306]
--mysql-socket=[LIST,...] MySQL socket
--mysql-user=STRING MySQL user [sbtest]
--mysql-password=STRING MySQL password []
--mysql-db=STRING MySQL database name [sbtest]
--mysql-ssl[=on|off] use SSL connections, if available in the client library [off]
--mysql-ssl-cipher=STRING use specific cipher for SSL connections []
--mysql-compression[=on|off] use compression, if available in the client library [off]
--mysql-debug[=on|off] trace all client library calls [off]
--mysql-ignore-errors=[LIST,...] list of errors to ignore, or "all" [1213,1020,1205]
--mysql-dry-run[=on|off] Dry run, pretend that all MySQL client API calls are successful without executing them [off]
pgsql options: # PostgreSQL 数据库专用选项
--pgsql-host=STRING PostgreSQL server host [localhost]
--pgsql-port=N PostgreSQL server port [5432]
--pgsql-user=STRING PostgreSQL user [sbtest]
--pgsql-password=STRING PostgreSQL password []
--pgsql-db=STRING PostgreSQL database name [sbtest]
Compiled-in tests: # 內建测试类型
fileio - File I/O test
cpu - CPU performance test
memory - Memory functions speed test
threads - Threads subsystem performance test
mutex - Mutex performance test
See 'sysbench <testname> help' for a list of options for each test.
sysbench <testname> help
通过 sysbench <testname> help 命令可以查看具体一个测试类型的帮助信息。
# sysbench fileio --help
sysbench 1.0.9 (using system LuaJIT 2.0.4)
fileio options:
--file-num=N number of files to create [128]
--file-block-size=N block size to use in all IO operations [16384]
--file-total-size=SIZE total size of files to create [2G]
--file-test-mode=STRING test mode {seqwr, seqrewr, seqrd, rndrd, rndwr, rndrw}
--file-io-mode=STRING file operations mode {sync,async,mmap} [sync]
--file-async-backlog=N number of asynchronous operatons to queue per thread [128]
--file-extra-flags=STRING additional flags to use on opening files {sync,dsync,direct} []
--file-fsync-freq=N do fsync() after this number of requests (0 - don't use fsync()) [100]
--file-fsync-all[=on|off] do fsync() after each write operation [off]
--file-fsync-end[=on|off] do fsync() at the end of test [on]
--file-fsync-mode=STRING which method to use for synchronization {fsync, fdatasync} [fsync]
--file-merged-requests=N merge at most this number of IO requests if possible (0 - don't merge) [0]
--file-rw-ratio=N reads/writes ratio for combined test [1.5]
3.2 测试 CPU
CPU 测试时，会计算素数（对这个数字除以 2 到这个数字平方根之间的所有数字来验证素数）直到某个指定值所需要的时间。单纯的测试一组非常有限 CPU 硬件性能。
CPU 基准测试时可以指定线程数量和素数上限。
先查看帮助信息：
[root@VM_157_18_centos ~]# sysbench cpu help
sysbench 1.0.9 (using system LuaJIT 2.0.4)
cpu options:
--cpu-max-prime=N 素数发生器的上限（upper limit for primes generator） [10000]
开始测试：
[root@VM_157_18_centos ~]# sysbench --cpu-max-prime=10000 --threads=2 cpu run
sysbench 1.0.9 (using system LuaJIT 2.0.4)
Running the test with following options:
Number of threads: 2
Initializing random number generator from current time
Prime numbers limit: 10000
Initializing worker threads...
Threads started!
CPU speed:
events per second: 727.23
General statistics:
total time: 10.0020s
total number of events: 7275
Latency (ms):
min: 1.34
avg: 2.75
max: 39.37
95th percentile: 12.30
sum: 19982.10
Threads fairness:
events (avg/stddev): 3637.5000/1.50
execution time (avg/stddev): 9.9911/0.00
3.3 测试 fileio
使用 fileio 时，需要创建一组测试文件，测试文件需要大于可用内存的大小，避免文件缓存在内存中影响结果。测试流程为：准备测试文件-》测试-》回收测试文件，命令如下：
# sysbench --file-total-size=28G --test=fileio prepare
# sysbench --file-total-size=28G --file-test-mode=rndrw --time=300 --max-requests=0 --test=fileio run
# sysbench --file-total-size=28G fileio cleanup
对于 I/O 基准测试，可以通过 --file-test-mode 告诉 sysbench 要运行的工作负载的类型，可用类型有：
seqwr：顺序写入
seqrewr：顺序重写
seqrd：顺序读取
rndrd：随机读取
rndwr：随机写入
rndrw：随机读取/写入
上面的例子中使用的是随机读取/写入（rndrw）。通过 --time 选项指定测试持续时间（以秒为单位）。
帮助信息：
# sysbench fileio help
sysbench 1.0.9 (using system LuaJIT 2.0.4)
fileio options:
--file-num=N number of files to create [128]
--file-block-size=N block size to use in all IO operations [16384]
--file-total-size=SIZE total size of files to create [2G]
--file-test-mode=STRING test mode {seqwr, seqrewr, seqrd, rndrd, rndwr, rndrw}
--file-io-mode=STRING file operations mode {sync,async,mmap} [sync]
--file-async-backlog=N number of asynchronous operatons to queue per thread [128]
--file-extra-flags=STRING additional flags to use on opening files {sync,dsync,direct} []
--file-fsync-freq=N do fsync() after this number of requests (0 - don't use fsync()) [100]
--file-fsync-all[=on|off] do fsync() after each write operation [off]
--file-fsync-end[=on|off] do fsync() at the end of test [on]
--file-fsync-mode=STRING which method to use for synchronization {fsync, fdatasync} [fsync]
--file-merged-requests=N merge at most this number of IO requests if possible (0 - don't merge) [0]
--file-rw-ratio=N reads/writes ratio for combined test [1.5]
命令的完整输出如下：
[root@VM_157_18_centos ~]# sysbench --file-total-size=28G fileio prepare
sysbench 1.0.9 (using system LuaJIT 2.0.4)
128 files, 229376Kb each, 28672Mb total
Creating files for the test...
Extra file open flags: 0
Creating file test_file.0
Creating file test_file.1
...此处总共创建了 128 个文件，每个 229376Kb，总共 28672Mb
Creating file test_file.127
30064771072 bytes written in 255.52 seconds (112.21 MiB/sec).
[root@VM_157_18_centos ~]# sysbench --file-total-size=28G --file-test-mode=rndrw --time=300 --max-requests=0 fileio run
sysbench 1.0.9 (using system LuaJIT 2.0.4)
Running the test with following options:
Number of threads: 1
Initializing random number generator from current time
Extra file open flags: 0
128 files, 224MiB each
28GiB total file size
Block size 16KiB
Number of IO requests: 0
Read/Write ratio for combined random IO test: 1.50
Periodic FSYNC enabled, calling fsync() each 100 requests.
Calling fsync() at the end of test, Enabled.
Using synchronous I/O mode
Doing random r/w test
Initializing worker threads...
Threads started!
File operations:
reads/s: 96.00
writes/s: 64.00
fsyncs/s: 204.47
Throughput:
read, MiB/s: 1.50
written, MiB/s: 1.00
General statistics:
total time: 300.0016s
total number of events: 109341
Latency (ms):
min: 0.00
avg: 2.74
max: 256.76
95th percentile: 7.17
sum: 299726.28
Threads fairness:
events (avg/stddev): 109341.0000/0.00
execution time (avg/stddev): 299.7263/0.00
[root@VM_157_18_centos ~]# sysbench --file-total-size=28G fileio cleanup
sysbench 1.0.9 (using system LuaJIT 2.0.4)
Removing test files...
2.4 测试 memory
当在 sysbench 中进行内存测试时，会分配一个内存缓冲区并在此执行读写操作，每次操作都会读完或写满缓冲区。然后重复此操作直到达到指定大小（--memory-total-size）。可以提供多个线程（--threads），不同的缓冲区大小（--memory-block-size）和请求类型（读或写，顺序或随机）。
帮助信息：
# sysbench memory help
sysbench 1.0.9 (using system LuaJIT 2.0.4)
memory options:
--memory-block-size=SIZE size of memory block for test [1K]
--memory-total-size=SIZE total size of data to transfer [100G]
--memory-scope=STRING memory access scope {global,local} [global]
--memory-hugetlb[=on|off] allocate memory from HugeTLB pool [off]
--memory-oper=STRING type of memory operations {read, write, none} [write]
--memory-access-mode=STRING memory access mode {seq,rnd} [seq]
例如，指定 4 个线程，缓冲区大小为 8KB，在内存中传输 4GB 数据的测试：
[root@VM_157_18_centos ~]# sysbench --threads=4 --memory-block-size=8k --memory-total-size=4G memory run
sysbench 1.0.9 (using system LuaJIT 2.0.4)
Running the test with following options:
Number of threads: 4
Initializing random number generator from current time
Running memory speed test with the following options:
block size: 8KiB
total size: 4096MiB
operation: write
scope: global
Initializing worker threads...
Threads started!
Total operations: 524288 (731249.24 per second)
4096.00 MiB transferred (5712.88 MiB/sec)
General statistics:
total time: 0.7150s
total number of events: 524288
Latency (ms):
min: 0.00
avg: 0.00
max: 43.03
95th percentile: 0.00
sum: 1871.33
Threads fairness:
events (avg/stddev): 131072.0000/0.00
execution time (avg/stddev): 0.4678/0.04
2.5 测试 threads
测试 threads 时，每个工作线程将被分配一个 mutex（一种锁）。每次执行时，每个线程将循环若干次（通过 --thread-yields 的数量设置），循环时这个线程会锁定，在再次执行时解锁。
通过调整各种参数，可以模拟具有单个或多个锁的高并发线程下的情况。
帮助信息：
# sysbench threads help
sysbench 1.0.9 (using system LuaJIT 2.0.4)
threads options:
--thread-yields=N number of yields to do per request [1000]
--thread-locks=N number of locks per thread [8]
运行测试：
[root@VM_157_18_centos ~]# sysbench --thread-yields=2000 --thread-locks=8 threads run
sysbench 1.0.9 (using system LuaJIT 2.0.4)
Running the test with following options:
Number of threads: 1
Initializing random number generator from current time
Initializing worker threads...
Threads started!
General statistics:
total time: 10.0002s
total number of events: 16554
Latency (ms):
min: 0.50
avg: 0.60
max: 37.05
95th percentile: 0.94
sum: 9978.12
Threads fairness:
events (avg/stddev): 16554.0000/0.00
execution time (avg/stddev): 9.9781/0.00
2.6 测试 mutex
测试 mutex 时，sysbench 将为每个线程运行一个请求。这个请求首先会对 CPU 施加一些压力（使用一个简单的增量循环，通过 --mutex-loops 参数设置），然后随机使用一个 mutex（锁），递增一个全局变量并再次释放锁。这个过程根据锁的个数（--mutex-locks）多次重复。随机 mutex 取自大小为 --mutex-num 的参数池。
帮助信息：
# sysbench mutex help
sysbench 1.0.9 (using system LuaJIT 2.0.4)
mutex options:
--mutex-num=N total size of mutex array [4096]
--mutex-locks=N number of mutex locks to do per thread [50000]
--mutex-loops=N number of empty loops to do outside mutex lock [10000]
运行测试：
[root@VM_157_18_centos ~]# sysbench mutex run
sysbench 1.0.9 (using system LuaJIT 2.0.4)
Running the test with following options:
Number of threads: 1
Initializing random number generator from current time
Initializing worker threads...
Threads started!
General statistics:
total time: 0.2132s
total number of events: 1
Latency (ms):
min: 213.10
avg: 213.10
max: 213.10
95th percentile: 211.60
sum: 213.10
Threads fairness:
events (avg/stddev): 1.0000/0.00
execution time (avg/stddev): 0.2131/0.00
2.7 OLTP 基准测试
OLTP 基准测试模拟了一个简单的事务处理系统的工作负载。然而最新版本的 sysbench 把 OLTP 这个曾经的內建测试类型移除了，如果要用，需要在命令中指定测试类型的位置用 /usr/share/sysbench/oltp_read_only.lua 脚本代替测试类型。
流程：指定数据库-》建表并生成数据-》运行测试-》清理测试表。
首先生成表，注意替换命令中的数据库密码和 MySQL 套接字，如果 MySQL 安装在默认位置，可以去掉 --mysql-socket 选项：
sysbench --db-driver=mysql --mysql-user=root --mysql-password=<pwd>
--mysql-socket=<mysql.sock path> --mysql-db=foo --range_size=100
--table_size=10000 --tables=2 --threads=2 --events=0 --time=60
--rand-type=uniform /usr/share/sysbench/oltp_read_only.lua prepare
运行测试，指定了 2 个并发线程，：
sysbench --db-driver=mysql --mysql-user=root --mysql-password=<pwd>
--mysql-socket=<mysql.sock path> --mysql-db=foo --range_size=100
--table_size=10000 --tables=2 --threads=2 --events=0 --time=60
--rand-type=uniform /usr/share/sysbench/oltp_read_only.lua run
清理测试时生成的测试表：
sysbench --db-driver=mysql --mysql-user=root --mysql-password=<pwd>
--mysql-socket=<mysql.sock path> --mysql-db=foo --range_size=100
--table_size=10000 --tables=2 --threads=2 --events=0 --time=60
--rand-type=uniform /usr/share/sysbench/oltp_read_only.lua cleanup
例如我的选项就是：
[root@VM_157_18_centos ~]# sysbench --db-driver=mysql --mysql-user=root --mysql-password=1qaz@WSX --mysql-db=foo --range_size=100 --table_size=10000 --tables=2 --threads=1 --events=0 --time=60 --rand-type=uniform /usr/share/sysbench/oltp_read_only.lua prepare
sysbench 1.0.9 (using system LuaJIT 2.0.4)
Creating table 'sbtest1'...
Inserting 10000 records into 'sbtest1'
Creating a secondary index on 'sbtest1'...
Creating table 'sbtest2'...
Inserting 10000 records into 'sbtest2'
Creating a secondary index on 'sbtest2'...
[root@VM_157_18_centos ~]# sysbench --db-driver=mysql --mysql-user=root --mysql-password=1qaz@WSX --mysql-db=foo --range_size=100 --table_size=10000 --tables=2 --threads=1 --events=0 --time=60 --rand-type=uniform /usr/share/sysbench/oltp_read_only.lua run
sysbench 1.0.9 (using system LuaJIT 2.0.4)
Running the test with following options:
Number of threads: 1
Initializing random number generator from current time
Initializing worker threads...
Threads started!
SQL statistics:
queries performed:
read: 645708
write: 0
other: 92244
total: 737952
transactions: 46122 (768.67 per sec.)
queries: 737952 (12298.73 per sec.)
ignored errors: 0 (0.00 per sec.)
reconnects: 0 (0.00 per sec.)
General statistics:
total time: 60.0003s
total number of events: 46122
Latency (ms):
min: 1.06
avg: 1.30
max: 34.08
95th percentile: 1.50
sum: 59896.08
Threads fairness:
events (avg/stddev): 46122.0000/0
[root@VM_157_18_centos ~]# sysbench --db-driver=mysql --mysql-user=root --mysql-password=1qaz@WSX --mysql-db=foo --range_size=100 --table_size=10000 --tables=2 --threads=1 --events=0 --time=60 --rand-type=uniform /usr/share/sysbench/oltp_read_only.lua cleanup
sysbench 1.0.9 (using system LuaJIT 2.0.4)
sysbench --file-total-size=10G --file-test-mode=rndrw --max-time=180 --max-requests=0 --seqrewr=fileio run